Product Overview
We specialize in the production of CT bypass oil filter machine. CT bypass oil filter machine is a large-flow bypass oil filter. It has its own power and it can be operated independently. Featured by high filtering accuracy and large filtering area, it can filter micron-level pollutants.
CT bypass oil filter machine
1、Product introduction of CT bypass oil filter machine
CT bypass oil filter machine is mainly used for precised filtration of oil in large hydraulic equipment. It adopts bypass type online filtering method and it is installed on the machine to be used together with hydraulic equipment. The independent operation of CT bypass oil filter machine does not change the oil circuit of the main machine and the original working state. The CT bypass oil filter machine and the main machine operate synchronously to remove the oil contaminants generated by the machine in real time, greatly extend the service life of the oil, reduce the failure rate of the hydraulic system, and keep the hydraulic system in good working condition. CT bypass oil filter machine is widely used in hydraulic equipment such as plastic machinery, casting machinery, quenching equipment, finishing mill, thin oil station, servo hydraulic press and large hydraulic station.
2、Technical parameters of CT bypass oil filter machine
3、Product features of CT bypass oil filter machine
The filter element of CT precised bypass oil filter is made of wood pulp, cellulose and additives. It has three functions: water absorption, adsorption and subsumption.
|
Model |
CT-302T-CS |
CT-402T-CS |
CT-502T-CS |
|
Supporting filter model |
ME-200T |
ME-200T |
ME-200T |
|
Filtering accuracy |
μ grade |
μ grade |
μ grade |
|
Highest cleanliness grade |
NAS 5 |
NAS 5 |
NAS 5 |
|
Oil pump flow |
13.0L/min |
18.0L/min |
24.0L/min |
|
Maximum water removal amount (approximately) |
3.6L |
5L |
6L |
|
Maximum decontamination amount (approximately) |
9Kg |
12Kg |
15Kg |
|
Oil temperature range |
0～80℃ |
0～80℃ |
0～80℃ |
|
Viscosity range |
9～180cSt |
9～180cSt |
9～180cSt |
|
Weight (kg) |
110 |
130 |
150 |
|
Dimensions LxWxH(mm) |
500x350x700 |
500x350x900 |
500x350x1000 |
|
Rated power (KW) |
1.5 |
1.5 |
1.5 |
|
Voltage |
Three-phase 380V |
Three-phase 380V |
Three-phase 380V |
|
Applicable fuel tank capacity |
≤ 2000L |
≤ 3000L |
≤4000L |
3、Product features of CT bypass oil filter machine
a. Large flow, large filtering area, high dirt holding capacity
b. High filtering accuracy, the oil cleanliness level after filtration can be as high as NAS5
c. The magnetic filter element combined with wood pulp fiber is used to filter out neutral and polar pollutants at the same time.
d. It can filter out moisture, oil oxides, sludge and micron solid particles
e. The prompt of filter element saturation alarm is intelligent and convenient, and the maintenance is worry-free
f. Extend the service life of the oil and reduce the failure rate of the hydraulic system
4、Picture of CT bypass oil filter machine element after use
The filter element of CT precised bypass oil filter is made of wood pulp, cellulose and additives. It has three functions: water absorption, adsorption and subsumption.
E-mail
0755-28030199